Search results for " pulsed laser"
showing 10 items of 12 documents
Electrochemical methods for carrier type identification of ZnO films grown by pulsed laser deposition on InP.
2013
Enhancement of photoconversion efficiency in dye-sensitized solar cells exploiting pulsed laser deposited niobium pentoxide blocking layers
2015
Abstract Among all the photovoltaic technologies developed so far, dye-sensitized solar cells are considered as a promising alternative to the expensive and environmentally unfriendly crystalline silicon-based solar cells. One of the possible strategies employed to increase their photovoltaic efficiency is to reduce the charge recombination at the cell conductive substrate through the use of a compact blocking layer. In this paper, we report on the fabrication and characterization of dye-sensitized solar cells employing niobium pentoxide (Nb 2 O 5 ) thin film blocking layer deposited through the pulsed laser deposition technique on conductive substrates. The careful selection of the optimal…
Synthesis of multi-color luminescent ZnO nanoparticles by ultra-short pulsed laser ablation
2020
Abstract Crystalline ZnO nanoparticles (NPs) are synthesized by ultra-short femtosecond (fs) pulsed laser ablation (PLA) of a zinc plate in deionized water, and are investigated by optical absorption and time resolved luminescence spectra in combination with the morphology and structure analysis. The comparison with previous experiments based on short nanosecond (ns) PLA highlights that pulse duration is a crucial parameter to determine the size and the optical properties of ZnO NPs. While short PLA generates NPs with average size S ‾ of ~ 30 nm, ultrashort PLA allows to achieve much smaller NPs, S ‾ ⩽ 10 nm, that evidence weak quantum confinement effects on both the absorption edge and th…
Laser irradiation of ZnO:Al/Ag/ZnO:Al multilayers for electrical isolation in thin film photovoltaics
2013
Laser irradiation of ZnO:Al/Ag/ZnO:Al transparent contacts is investigated for segmentation purposes. The quality of the irradiated areas has been experimentally evaluated by separation resistance measurements, and the results are complemented with a thermal model used for numerical simulations of the laser process. The presence of the Ag interlayer plays two key effects on the laser scribing process by increasing the maximum temperature reached in the structure and accelerating the cool down process. These evidences can promote the use of ultra-thin ZnO:Al/ Ag/ZnO:Al electrode in large-area products, such as for solar modules. © 2013 Crupi et al.; licensee Springer.
In situ monitoring of pulsed laser indium–tin-oxide film deposition by optical emission spectroscopy
2001
We performed optical emission spectroscopy to monitor the plasma produced during the ablation of indium-tin-oxide targets under different oxygen pressure conditions using a pulsed UV laser. Molecular bands of InO were identified in the fluorescent spectra produced by pulsed laser ablation. InO line monitoring allowed obtaining the optimal conditions for good-quality ITO film deposition. We demonstrated that it is possible to correlate InO line spectroscopic parameters with the conditions required to fabricate a high-conductivity and high-transparent ITO thin film. In particular, low resistivity (10-4 to 10-3 Ω cm) was obtained in films deposited at room temperature by regulating oxygen pres…
Effects of the process conditions on the plume of a laser-irradiated indium–tin-oxide target
2001
Abstract The plume of a laser-ablated indium–tin-oxide target was investigated by optical emission spectroscopy. Atomic and ionic species of indium, tin and oxygen were observed; moreover, molecular bands of indium oxide were identified in the fluorescent spectra. The effects of the oxygen as a background gas and of the laser fluence on the behaviour of the ejected particles were studied with respect to the intensity of the emission and the delay time as a function of the observation distance from the target surface. The non-linear behaviour of the fluorescent species with the process conditions could infer spatial variations of the plume composition. The analysis demonstrates a plume expan…
Stability/Instability of Conductivity and Work Function Changes of ITO Thin Films, UV-Irradiated in Air or Vacuum. Measurements by the Four-Probe Met…
2001
This study shows that, after UV-irradiation in air or vacuum, conductivity and work function of ITO and In2O3 come back to their initial values in a few hours or minutes. In addition to this instability, one of the reported drawbacks of ITO is the indium diffusion into the organic layers of operating LED, leading to performance degradation. So, we have reconsidered ITO as transparent anode and explored alternatives such as NiO.
Luminescence Efficiency of Si/SiO 2 Nanoparticles Produced by Laser Ablation
2019
Photoluminescence properties of Si(core)/SiO 2 (shell) nanoparticles produced by pulsed laser ablation in aqueous solution are investigated with the purpose to highlight the microscopic processes that govern the emission brightness and stability. Time resolved spectra evidence that these systems emit a µs decaying band centered around 1.95 eV, that is associated with the radiative recombination of quantum-confined excitons generated in the Si nanocrystalline core. Both the quantum efficiency and the stability of this emission are strongly dependent on the pH level of the solution, that is changed after the laser ablation is performed. They enhance in acid environment because of the H + pass…
Density of States characterization of TiO2 films deposited by Pulsed Laser Deposition for Heterojunction solar cells
2021
The application of titanium dioxide (TiO2) in the photovoltaic field is gaining traction as this material can be deployed in doping-free heterojunction solar cells with the role of electron selective contact. For modeling-based optimization of such contact, knowledge of the titanium oxide defect density of states is crucial. In this paper, we report a method to extract the defect density through nondestructive optical measures, including the contribution given by small polaron optical transitions. The presence of both related to oxygen-vacancy defects and polarons is supported by the results of optical characterizations and the evaluation of previous observations resulting in a defect band …
Analysis of Transition Metal Oxides based Heterojunction Solar Cells with S-shaped J-V curves
2020
The use of transition metal oxides for the selective carrier contact in the crystalline silicon solar cells technology is rising to interest for the excellent optoelectrical properties of these materials whose implementation, however, can result in lousy performing cells due to an S-shaped electrical characteristic. In this paper, we fabricated solar cells showing S-shaped J-V curve and carried out an analysis of the reasons of such behavior using a model involving the series of a standard cell equivalent circuit with a Schottky junction in order to explain these atypical performances. A good matching between the experimental measurements and the adopted theoretical model was obtained. The …